Search for: All records

Dental microwear reflects the abrasiveness of foodstuffs consumed by extant primates and it is commonly used to trace dietary adapta-tions in fossil hominins. However, the impact of feeding events and ecological constraints on micro-scale tooth wear formation processes remain unclear. Here, we use dental buccal-mi-crowear analysis to test age-related effects of physical food processing on tooth-use in a natu-rally accumulated skeletal assemblage from the well-documented population of mountain gorillas from Volcanoes National Park, Rwanda. We analyzed dental microwear pattern of single teeth belonging to individual skeletons: 14 decid-uous m2 (aged 1.2-6.08 years) and 39 permanent molars (~90% M2) of adult gorillas (10.69-44.55 years, 25 males and 14 females). Our results indicate that adult gorillas present more abraded molar buccal surfaces, with significantly higher densities and longer micro-striations, than imma-ture individuals, which reflects the abrasive potential of ingested foods and the micro-stria-tion cumulative process. However, we also found that dental buccal-microwear variability was not associated with age when only adult gorillas were considered. Thus, gorillas from this popula-tion present a stable microwear pattern through adulthood, despite intraindividual variability in feeding ecology. Our findings show the cumulative process of dental buccal-microwear as immature mountain gorillas increase their intake of solid foods and develop an adult diet; but also, the stability of this pattern when diet over time is stable. We confirm that dental buccal-microwear variability is a reasonable proxy for feeding ecology in primates, although seasonality, habitat variability and diet proportions at individual level should be considered in future studies. 

Patterned charged membranes with engendered useful characteristics can offer selective transport of electrolytes. Chemical patterning across the membrane surface via a physical inkjet deposition process requires precise control of the reactive-ink formulation, which enables the introduction of charged functionality to the membrane. This study develops a new dynamic mathematical model for the primary step of the batch reactive-ink formulation considering an ink mixture of copper sulphate and ascorbic acid. Nonlinear least squares parameter estimation is performed to infer three kinetic model parameters by analysing data from nine dynamic experiments simultaneously. Global sensitivity and Fisher information matrix (FIM) analyses reveal only one kinetic parameter is identifiable from time-series pH measurements. The fitted model can capture the overall nonlinear dynamics of the batch reaction and works best for initial Cu2 + concentrations between 30 and 50 mM. Time-series Cu2 + or Cu+ concentration measurements are recommended in future experiments to elucidate the kinetics of reactive-ink formulation. 

Electron-neutrino charged-current interactions with xenon nuclei were modeled in the nEXO neutrinoless double- $\beta$decay detector ( $\sim 5$metric ton, 90% ${}^{136}\mathrm{Xe}$, 10% ${}^{134}\mathrm{Xe}$) to evaluate its sensitivity to supernova neutrinos. Predictions for event rates and detectable signatures were modeled using the Model of Argon Reaction Low Energy Yields (MARLEY) event generator. We find good agreement between MARLEY’s predictions and existing theoretical calculations of the inclusive cross sections at supernova neutrino energies. The interactions modeled by MARLEY were simulated within the nEXO simulation framework and were run through an example reconstruction algorithm to determine the detector’s efficiency for reconstructing these events. The simulated data, incorporating the detector response, were used to study the ability of nEXO to reconstruct the incident electron-neutrino spectrum and these results were extended to a larger xenon detector of the same isotope enrichment. We estimate that nEXO will be able to observe electron-neutrino interactions with xenon from supernovae as far as 5–8 kpc from Earth, while the ability to reconstruct incident electron-neutrino spectrum parameters from observed interactions in nEXO is limited to closer supernovae. Published by the American Physical Society2024 

Asymptotic giant branch stars are responsible for the production of most of the heavy isotopes beyond Sr observed in the solar system. Among them, isotopes shielded from the $r$-process contribution by their stable isobars are defined as $s$-only nuclei. For a long time the abundance of ${}^{204}\mathrm{Pb}$, the heaviest $s$-only isotope, has been a topic of debate because state-of-the-art stellar models appeared to systematically underestimate its solar abundance. Besides the impact of uncertainties from stellar models and galactic chemical evolution simulations, this discrepancy was further obscured by rather divergent theoretical estimates for the neutron capture cross section of its radioactive precursor in the neutron-capture flow, ${}^{204}\mathrm{Tl}$( $t_{1/2}=3.78\mathrm{yr}$), and by the lack of experimental data on this reaction. We present the first ever neutron capture measurement on ${}^{204}\mathrm{Tl}$, conducted at the CERN neutron time-of-flight facility n_TOF, employing a sample of only 9 mg of ${}^{204}\mathrm{Tl}$produced at the Institute Laue Langevin high flux reactor. By complementing our new results with semiempirical calculations we obtained, at the $s$-process temperatures of $kT\approx 8\mathrm{keV}$and $kT\approx 30\mathrm{keV}$, Maxwellian-averaged cross sections (MACS) of 580(168) mb and 260(90) mb, respectively. These figures are about 3% lower and 20% higher than the corresponding values widely used in astrophysical calculations, which were based only on theoretical calculations. By using the new ${}^{204}\mathrm{Tl}$MACS, the uncertainty arising from the ${}^{204}\mathrm{Tl}(\mathrm{n},\gamma )$cross section on the $s$-process abundance of ${}^{204}\mathrm{Pb}$has been reduced from $\sim 30\%$down to $+8\%/-6\%$, and the $s$-process calculations are in agreement with the latest solar system abundance of ${}^{204}\mathrm{Pb}$reported by K. Lodders in 2021. Published by the American Physical Society2024 

Abstract Salient aspects of the commissioning, calibration, and performance of the CMS silicon strip tracker are discussed, drawing on experience during operation with proton-proton collisions delivered by the CERN LHC. The data were obtained with a variety of luminosities. The operating temperature of the strip tracker was changed several times during this period and results are shown as a function of temperature in several cases. Details of the system performance are presented, including occupancy, signal-to-noise ratio, Lorentz angle, and single-hit spatial resolution. Saturation effects in the APV25 readout chip preamplifier observed during early Run 2 are presented, showing the effect on various observables and the subsequent remedy. Studies of radiation effects on the strip tracker are presented both for the optical readout links and the silicon sensors. The observed effects are compared to simulation, where available, and they generally agree well with expectations. 

ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and $7\mathrm{GeV}/c$beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each beam momentum setting was measured to be $380\pm 26\mathrm{mbarns}$for the $6\mathrm{GeV}/c$setting and $379\pm 35\mathrm{mbarns}$for the $7\mathrm{GeV}/c$setting. Published by the American Physical Society2024 

The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements and provide comparisons to detector simulations. 

Abstract The Large Hadron Collider at CERN will undergo an upgrade in order to increase its luminosity to 7.5 × 10³⁴cm^-2s^-1. The increased luminosity during this High-Luminosity running phase, starting around 2029, means a higher rate of proton-proton interactions, hence a larger ionizing dose and particle fluence for the detectors. The current tracking system of the CMS experiment will be fully replaced in order to cope with the new operating conditions. Prototype planar pixel sensors for the CMS Inner Tracker with square 50 μm × 50 μm and rectangular 100 μm × 25 μm pixels read out by the RD53A chip were characterized in the lab and at the DESY-II testbeam facility in order to identify designs that meet the requirements of CMS during the High-Luminosity running phase. A spatial resolution of approximately 3.4 μm (2 μm) is obtained using the modules with 50 μm × 50 μm (100 μm × 25 μm) pixels at the optimal angle of incidence before irradiation. After irradiation to a 1 MeV neutron equivalent fluence of Φ_eq = 5.3 × 10¹⁵ cm^-2, a resolution of 9.4 μm is achieved at a bias voltage of 800 V using a module with 50 μm × 50 μm pixel size. All modules retain a hit efficiency in excess of 99% after irradiation to fluences up to 2.1 × 10¹⁶ cm^-2. Further studies of the electrical properties of the modules, especially crosstalk, are also presented in this paper. 

Abstract The Large Hadron Collider (LHC) at CERN will undergo major upgrades to increase the instantaneous luminosity up to 5–7.5×10 34 cm -2 s -1 . This High Luminosity upgrade of the LHC (HL-LHC) will deliver a total of 3000–4000 fb -1 of proton-proton collisions at a center-of-mass energy of 13–14 TeV. To cope with these challenging environmental conditions, the strip tracker of the CMS experiment will be upgraded using modules with two closely-spaced silicon sensors to provide information to include tracking in the Level-1 trigger selection. This paper describes the performance, in a test beam experiment, of the first prototype module based on the final version of the CMS Binary Chip front-end ASIC before and after the module was irradiated with neutrons. Results demonstrate that the prototype module satisfies the requirements, providing efficient tracking information, after being irradiated with a total fluence comparable to the one expected through the lifetime of the experiment. 

Abstract The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a charged-particle test beam. This paper gives an overview of the Pandora reconstruction algorithms and how they have been tailored for use at ProtoDUNE-SP. In complex events with numerous cosmic-ray and beam background particles, the simulated reconstruction and identification efficiency for triggered test-beam particles is above 80% for the majority of particle type and beam momentum combinations. Specifically, simulated 1 GeV/ c charged pions and protons are correctly reconstructed and identified with efficiencies of 86.1 $$\pm 0.6$$ ± 0.6 % and 84.1 $$\pm 0.6$$ ± 0.6 %, respectively. The efficiencies measured for test-beam data are shown to be within 5% of those predicted by the simulation.